2/4-Ch Network Power Amplifier with Ethernet/FIR
Class D; PFC wide operate voltage;
Built-in DSP module with FIR filter;
A variety of ports USB, RS485, Ethernet, Dante (optional).
Characteries:
l Built-in Analog digital signal processor, 1U Lightweight with strong power output；
l Audio signals can be processed accurately by Route, Gain, Phase, Mute, PEQ, Delay, Crossover, Compressor and Limiter;
l FIR filter, a variety of ports USB, RS485, Ethernet (network debugging);
l Adopt advanced Class D power amplifier module, the efficiency is above 92%, with extremely high efficiency and reliability;
l The power supply adopts an efficient and stable R-SMPS power supply system, and integrates an active power factor
correction circuit (PFC). It could adjust the current waveform according to the AC voltage waveform and adapt to a wide
range of voltages (90-264V) operation,while enabling a single standard circuit breaker to carry more power;
l Unique peak clipping limiter and ripple elimination network;
l The perfect protection system can effectively reduce the damage caused by improper use and further improve the reliability of the device.
Specifications：
Model | IDD4 | IDD8 | IDD18H | IDQ4 | IDQ8 | IDQ10 | IDQ15H | |
Channel | 2 | 2 | 2 | 4 | 4 | 4 | 4 | |
Output Power | 8Ω Stereo | 2 x 350W | 2 x 800W | 2 x 1800W | 4 x 350W | 4 x 800W | 4 x 1000W | 4 x 1500W |
| 4Ω Stereo | 2 x 580W | 2 x 1300W | 2 x 3000W | 4 x 550W | 4 x 1300W | 4 x 1700W | 4 x 2300W | |
| 2Ω Stereo | 2 x 800W | 2 x 1750W | 2 x 3600W | |||||
8Ω Bridge | 1 x 1160W | 1 x 2600W | 1 x 5600W | 2 x 1160W | 2 x 2600W | 2 x 3400W | 2 x 4600W | |
4Ω Bridge | 1 x 1600W | 1 x 3500W | 1 x 7200W | |||||
DSP Processing | 96KHz Sampling rate, 32/40-bit floating Processing, 24-bit A/D and D/A conversion | |||||||
Input Impedance | Bal /unbal :20KΩ/10KΩ | |||||||
Max input level | +17dBu (5.5V) | |||||||
Frequency response | 20Hz-20KHz, ±0.5dB | |||||||
Routing | Each output channel can select a different input channel or any combination of input channels | |||||||
Gain | Adjustable range：+15Db, -40dB, Step: 0.1dB | |||||||
Delay | Separately control for each input and output channel, adjustment range is 0-2000ms | |||||||
EQ | 31-band PEQ，EQ type : PEQ/Low-shelf/Hi-shelf | |||||||
FIR filter | 10 kinds of Filters，Top to 1024 TAPS | |||||||
Power Supply | AC 90V~264V (50~60 Hz) | |||||||